How To Clean Hot Water Heater Burner. Disconnect the elements from the manifold assembly: You will also disconnect the pilot light supply tube and the thermocouple.
This will extinguish the flame in the water heater and prevent it from trying to turn on while you are cleaning the burner. How to clean a tankless water heater burner. There should be a vertical gas pipe that tees into it.
Table of Contents
Before Troubleshooting A Water Heater Burner That Won’t Light, It Is Important To Know How It Works.
You should be able to solve the problem by simply turning off the water heater momentarily and giving the burner a good clean. The gas burner is an element that heats the water. You will find the shut off valve for the hot water heater on the vertical gas line.
If You Use Water To Clean Your Filter, Then Hang Your Filter To Dry, Or Wipe Down With A Cloth.
How to remove a gas burner. If the flue or vent system is blocked, make sure to find the cause, clean the pipes and remove the blockage. Loosen and remove the screws or nuts that secure the burner plate.
A Burner That Is Lit With Hot Surface Ignition Will Not Have A Pilot Burner Tube.
Start off by shutting down the water heater. Loosen the nut that connects the burner supply line to the control center. This video shows how to clean a tankless water heater burner, including cleaning these electrodes.
If You Use Water To Clean Out The Burner, Make Sure The Burner Is Completely Dry (Inside And Out) Before Reinstalling.
Then close the gas shutoff valve on the gas supply to your water heater. Only after the tank has completely refilled, turn on the power to the tank. You will also disconnect the pilot light supply tube and the thermocouple.
Generally, You Will Need To Unfasten A Recessed Bolt Using A Wrench.
Gas valve, pilot tube, thermopile. You need air to combust with fuel to operate. Remove the burner by unscrewing the bolts.