How To Clean Water Softener Salt Tank

How To Clean Water Softener Salt Tank. More cost efficient and reliable industrial uv applications, request a quote online now! How to clean a water softener tank.

Water Softener Maintenance Cleaning Out Your Brine Tank from

Your water softener brine tank is cleaned, and your system is. About 6mo ago, i replaced my 20+yo water softener with a morton m34 model (resin tank inside salt tank). This will complete the tank cleaning.

At This Point, You Can Clean The Resin Tank By Using Bleach And Water Before Reinstalling The Tank.

Put the system back in normal mode. The salt pellet level should be under the highest water level reached inside the water softener tank. The best time to clean is when you are about to add salt into the tank.

If A Salt Bridge Has Formed, Use Hot Water.

Dump water out of the brine tank. If your water softener comes with a resin tank, you’ll first want to unscrew the bolts and disconnect the unit from the valve. Rinse the salt plate well, dry it with a clean rag, and set it aside.

Now You Are Ready To Plug The Water Softener Back In And Turn It Back On.

Ideally, it is best to schedule a water softener cleaning a few months in advance. Clean out the tank with soap water (dish soap will do the trick), scrubbing the insides of the tank. Do not add too many salt pellets;

Set The Brine Valve On The Tarpaulin.

Remove the salt plate, immerse it in cold water, and add dish detergent. Step #1 shut off the water intake by turning the bypass valve. Put 5 gallons of clean water into the brine tank.

How To Clean A Water Softener Tank.

Now, carefully install the resin tank back to the water softener and refill the salt levels before plugging it back. The first method is to unplug the unit of water softener and then unscrew the bolt to remove the resin tank. If you notice mold in your water softener tank, you can run what’s known as a “bleach cycle” through the whole unit.

Leave a Reply

Your email address will not be published.