How To Color Epoxy Resin For River Table. Olive coffee table with planter. Start with carefully pouring the first layer of transparent resin into the epoxy resin and apply the surface with a torch or heat gun.
Measure the amount of epoxy needed for the table. If your project requires multiple layers of epoxy resin, pouring the next layer can happen when the first layer is nice and tacky so there is no need to sand. All you need is a wooden table with at least one wooden side (or just a wooden table of you like the color scheme but don't care about the river effect).
Table of Contents
How To Make An Epoxy Resin River Flowing Table?
Diy epoxy river rock table. Here are 50 wood epoxy resin table ideas. This will pop the bubbles and allow bubbles deeper in the epoxy to rise.
You Can Carefully Follow All The Instructions On How To Make An Epoxy River Table Which Is Included In The Video Below.
Start with carefully pouring the first layer of transparent resin into the epoxy resin and apply the surface with a torch or heat gun. You don’t have to pour 1/2”, 1/4” or less so you can wait 24 hours to dry and add another layer. Finally, do not forget to add color pigment when you want to create a river table effect.
Mix In The Tint Of Color Into.
Build a form to house your epoxy resin river flow table. Don’t overheat the resin for more than 4 seconds, otherwise resin will start to yellowing. Make sure to get all the edges and corners.
Remove The Bark Then Sand Those Areas While Removing All Sand Dust Afterwards.
An epoxy resin for coating and sealing a tabletop is also required, and applying a final transparent coating to your tabletop depends on you when your tabletop has been cured after cast. Demolding, light sanding, buffing and polishing; Keep in mind, if you are mixing with a drill attachment the faster the mixer spins the more air bubbles you will whip into the mix.
Popular Epoxy Resin Colors For River Tables Include Blue (Most Popular), Black, Grey, Gold, Green, Turquoise, Pearl, Orange And Red.
Step by step video following the build of this blue epoxy resin table. Pouring the mixed resin onto your tabletop mold and then letting it dry; Use these resin colorants to tint a your deep pour epoxy to create colorful castings or river table streams.