How To Determine Ac Tonnage From Model Number Carrier. The model number is where you can find the size of ac you’re looking for. For example, 024 equals 24,000 btus.
Numbers and nominal cooling capacities, are listed below: Question posted by francisco the building engineer on may 3, 2011. How to determine ac tonnage from model number carrier.
Table of Contents
These Are Reflected In The Model Numbers Near The Middle And Often Followed By A Letter.
Are located within the oval/round shaped buttons). For example, 024 equals 24,000 btus. A 2.5 ton system would have 30,000 btu’s.
Question Posted By Francisco The Building Engineer On May 3, 2011.
Some manufacturer’s systems make this easier than others. Divide the number by 12 (which represents 12,000 btu/hr, or one ton of cooling capacity) to get your ac unit's. (2) hover over each grouping to reveal pertinent info for each part of the model number.
Aquasnap Model Number Nomenclature / Chiller Model Number Chart.
The normal rule of thumb is to use division by 12 to get the size (tonnage) of the ac from the model number. Go outside to the condensing unit and look for a data plaque mounted to the side. You can determine the size in tons of your carrier hvac system by examining the model number on the data sticker at the side of the a/c condenser (outdoor unit).
Then, How Do I Know How Many Tons My Carrier Air Conditioner Is?
The easiest place to look is on the ac unit itself. This number will equal the tonnage of the ac unit. For example, a unit with 18,000 btus has a tonnage of 1.5.
To Calculate Tonnage, Divide The Btus By 12,000, Which Is The Weight Of One Refrigeration Ton.
How do you find the tonnage of a carrier ac unit? How to determine ac tonnage from model number carrier. Divide the number by 12 (which represents 12,000 btu/hr, or one ton of cooling capacity) to get your ac unit's tonnage.