close
close

How To Read Gas Meter Liberty Eg4V11

How To Read Gas Meter Liberty Eg4V11. How to read gas meter liberty eg4v11. The number you're after is the one followed by kwh;

How To Read Gas Meter Liberty Eg4v11 How to Guide 2022 from k.apecwln.org

Press 9 again at any time to go back to the start make sure to give them the m3 (metres cubed) reading, not the kwh reading for your gas. It was installed in 2018 and the gas supplier at that time was different. It will then cycle through number of readings.

How To Gas Rate On A Liberty E4 Gas Meter (Numeric Phone Style Keypad) Watch Later.

I doubt hall effect would work as there is no spinning dial. I take a meter reading every month on, or as near as possible to 17th but it is. Not open for further replies.

Type Code G01153” Electricity Meter Is “Secure Liberty 100 Type Code E1Sob1” I Have Also Discovered From Both Suppliers That If The Numbers “6” Or “9” Are Pressed The Meter Gives Up Its Secrets, In A String Of Info.

I have different meters for gas & electricity. Liberty eg4v 11 / 15 is based on a proven g4 measurement unit with an electronic index and isolation valve. As you can see, between march and april, the gas amount suddenly went up very highly.

I Press The 9 Key Which Prompts The Meter To Cycle Through Various Display Information, Starting With The Current Reading.

These have worked successfully since they were installed until the point of switching today, at which point the monitor has stopped working. The meter uses zigbee radio to link with the head end system and in home display (ihd) via the smart meter communications hub. Liberty user guide, volume 2;

Press 9 Again At Any Time To Go Back To The Start Make Sure To Give Them The M3 (Metres Cubed) Reading, Not The Kwh Reading For Your Gas.

The meter uses zigbee ® radio to provide link with head end system and in home display (ihd) via the smart meter communications hub. Although the version number for the liberty user guide, volume 2 was updated to 2013.03 in order to be consistent with the rest of the liberty documentation, its contents have not changed since the 2007.03 release. I attach the picture of the gas meter reading.

How To Read Gas Meter Liberty Eg4V11.

Press '9' on your keypad. By pressing the button the meter display will scroll through to the meter reading. If you have an economy 7 tariff, press ‘6’ on your keypad, then press it three more times until ‘imp r01’ appears on the smart meter display.

Leave a Reply

Your email address will not be published.