Remove Shower Drain Cover Pop Up. How to remove shower drain stopper cover. Push and hold the stopper and rotate the head counterclockwise.
Use a screwdriver or set of pliers to unscrew the drain stopper bolt from the threaded hole in the center of the drain crossbar and the entire drain stopper will lift out of the drain. Spray a liberal amount of lubricant and apply steady force until the drain cover pops out. I would like to replace the whole lot.
Table of Contents
Dry The Area On And Around The Shower Drain Cover.
There is no screw holding the trap to the plug section in the bath. Locate a screw in the centre of the cover. I can't figure out how to remove the stopper.
This Way You Can Keep Your Shower Drain Clean And Free From Possible Buildup.
There are two main types of bathtub drain covers. If it does not have a screw, it might be fixed firmly, so to loosen it up, add a lubricant. Simply unscrew the cover and detach.
Use A Screwdriver Or Set Of Pliers To Unscrew The Drain Stopper Bolt From The Threaded Hole In The Center Of The Drain Crossbar And The Entire Drain Stopper Will Lift Out Of The Drain.
As the bath is fiberglass, i don't want. I would like to replace the whole lot. Take the drain cover off the shower and put the vacuum hose right up against the drain.
How To Remove Shower Drain Stopper Cover.
Push and hold the stopper and rotate the head counterclockwise. Do so by pulling the stopper up until it disconnects from the trip lever. Hi, the pop up plug system has broken and needs replacing.
Place The Tip Of The Screwdriver In One Of The Grates And Use It To Pop Up And Lift The Drain Cover.
Remove the drain stopper if there is one. To remove, simply unscrew with the appropriate screwdriver and remove. According to my search on roller ball tub drains (see pic.) all you need to do is turn this stopper counterclockwise to remove it.